The Cellar - View Single Post - Building a bandsaw on the cheap from mostly scrap wood

footfootfoot · 10-18-2016, 05:13 PM

is it that the plywood needs to move to the left in your photo, or the peg needs to move to the left, or both?
In either case I'd just rip a few strips of 3/16" thick material off a 1x and glue that to either the ply or the frame.

Probably a metric/standard issue. Metric ply is a shade larger than 1/4, 3/8. or 1/2 and standard ply is a shade under 1/4, 3/8, 1/2" etc. Not sure it would add up to 3/16" though. Probably it's the nut behind the wrench...

10-18-2016, 05:13 PM	#7
footfootfoot To shreds, you say? Join Date: Aug 2004 Location: in the house and on the street-how many, many feet we meet! Posts: 18,449	is it that the plywood needs to move to the left in your photo, or the peg needs to move to the left, or both? In either case I'd just rip a few strips of 3/16" thick material off a 1x and glue that to either the ply or the frame. Probably a metric/standard issue. Metric ply is a shade larger than 1/4, 3/8. or 1/2 and standard ply is a shade under 1/4, 3/8, 1/2" etc. Not sure it would add up to 3/16" though. Probably it's the nut behind the wrench... __________________ The internet is a hateful stew of vomit you can never take completely seriously. - Her Fobs