The Cellar - View Single Post

lumberjim · 01-10-2019, 01:15 AM

To be able to rout a straight line on the left, I need to make a little jig. I used a piece of the left over plywood I made my bench out of because it's 3/4" thick. First I need a template to transfer the shape.

I cut the paper out with an exacto. Then tape that and trace on the plywood. Cut that out with the band saw.

Took me 2 tries. But with that in the large area and taped down, I routed the remaining 1/4" through to the front.

And we're through!

01-10-2019, 01:15 AM	#143
lumberjim I can hear my ears Join Date: Oct 2003 Posts: 25,571	To be able to rout a straight line on the left, I need to make a little jig. I used a piece of the left over plywood I made my bench out of because it's 3/4" thick. First I need a template to transfer the shape. I cut the paper out with an exacto. Then tape that and trace on the plywood. Cut that out with the band saw. Took me 2 tries. But with that in the large area and taped down, I routed the remaining 1/4" through to the front. And we're through! __________________ This body holding me reminds me of my own mortality Embrace this moment, remember We are eternal, all this pain is an illusion ~MJKeenan