What did you make today? - Page 53

sexobon · 03-03-2019, 11:58 AM

Quote:

Originally Posted by Gravdigr

I love seeing pics of Bennie. ...

Pepé Le Pew would fall in love with Benny.

Gravdigr · 03-03-2019, 12:10 PM

I made breakfast.

BigV · 03-06-2019, 12:00 AM

Quote:

Originally Posted by Griff

Not pictured is mess of a work bench behind me with nowhere to put tools and no vise.

I wish I could come over to your house sometime to play.

Griff · 03-06-2019, 06:51 AM

Glinda · 03-07-2019, 02:54 PM

Just made a big dish of meat/cheese enchiladas, using a recipe I found online and doctored up.

The picture doesn't do them justice. They were pretty tasty (and super easy).

xoxoxoBruce · 03-07-2019, 03:03 PM

You are a cruel cruel woman. drool

Griff · 03-07-2019, 05:29 PM

:yum

Glinda · 03-07-2019, 06:22 PM

Thank you! Now imagine them with a little sour cteam, guac, and chopped green onions on top.

Glinda · 03-07-2019, 06:25 PM

Yes. I am evil.

Gravdigr · 03-08-2019, 01:09 PM

Oh, you ain't evil. You're just a hot chick that can cook.

Come to think of it, that does sound like the debbil's work.

Glinda · 03-09-2019, 12:20 PM

Today, I think I'll make grilled kielbasa with fried potatoes and sauerkraut. MMmmm. Comfort food!

Pics later, if I remember. Right now, I need to go let some goats out of their pen. No rest for the wicked!

Clodfobble · 03-09-2019, 12:33 PM

No good place to put this, so I'mma just leave it here.

Mr. Clod bought a new table saw. Big ol' fucker, I don't even know how many hundreds of pounds. Instructions said "it ships on its side for safety, here's how to properly maneuver it into a vertical position once the freight guy unloads it from the truck--you know, with his ramps and his dolly and all that professional jazz."

Except it wasn't delivered, it was put into the back of Mr. Clod's truck at the woodshop. So he got home, then asked himself, "Hmm, how am I going to transfer this down 4 feet to the ground? Because I do not have ramps or a commercial dolly, etc." Neighbor swung by, said he'd help, but the thing turned out to be far heavier than either anticipated, and they barely got it moved laterally over to the top of the work bench before becoming dangerously tired. They set it down to rest, and the neighbor said, "Cool, that was fun, gotta go."

Next thing I know, he texts me from the garage for help. I come out to find the damn thing suspended with ratchet straps from the fucking ceiling, the corners barely holding on.

Long story short, it got lowered down to the ground and is fine now. But goddamn. I can't believe I'm still not a widow by now.

Gravdigr · 03-09-2019, 01:03 PM

Bullshit. Y'all got a sex swing dintchya?

glatt · 03-09-2019, 03:06 PM

ratcheting straps are great for tightening things slowly and incrementally, but loosening them, they let go all at once. How did he get it down?

Glinda · 03-09-2019, 03:08 PM

Lunch:

Chicken salad sammy with crushed walnuts
Cucumber slices
Jalepeno Kettle chips
Mandarin orange wedges

Oh, and Jack Daniels and Diet Coke.

03-03-2019, 12:10 PM	#782
Gravdigr The Un-Tuckian Join Date: Apr 2007 Location: South Central...KY that is Posts: 39,517	What did you make today? I made breakfast. __________________ These statements have not been evaluated by the FDA, EPA, FBI, DEA, CDC, or FDIC. These statements are not intended to diagnose, cause, treat, cure, or prevent any disease. If you feel you have been harmed/offended by, or, disagree with any of the above statements or images, please feel free to fuck right off.

03-06-2019, 06:51 AM	#784
Griff still says videotape Join Date: Feb 2001 Posts: 26,813	__________________ If you would only recognize that life is hard, things would be so much easier for you. - Louis D. Brandeis

03-07-2019, 03:03 PM	#786
xoxoxoBruce The future is unwritten Join Date: Oct 2002 Posts: 71,105	You are a cruel cruel woman. drool __________________ The descent of man ~ Nixon, Friedman, Reagan, Trump.

03-07-2019, 05:29 PM	#787
Griff still says videotape Join Date: Feb 2001 Posts: 26,813	:yum __________________ If you would only recognize that life is hard, things would be so much easier for you. - Louis D. Brandeis

03-08-2019, 01:09 PM	#790
Gravdigr The Un-Tuckian Join Date: Apr 2007 Location: South Central...KY that is Posts: 39,517	Oh, you ain't evil. You're just a hot chick that can cook. Come to think of it, that does sound like the debbil's work. __________________ These statements have not been evaluated by the FDA, EPA, FBI, DEA, CDC, or FDIC. These statements are not intended to diagnose, cause, treat, cure, or prevent any disease. If you feel you have been harmed/offended by, or, disagree with any of the above statements or images, please feel free to fuck right off.

03-07-2019, 02:54 PM	#785
Glinda Fucktard Resistance League Join Date: Jun 2008 Location: 1.14 acres of heaven Posts: 1,512	Just made a big dish of meat/cheese enchiladas, using a recipe I found online and doctored up. The picture doesn't do them justice. They were pretty tasty (and super easy).

03-07-2019, 06:22 PM	#788
Glinda Fucktard Resistance League Join Date: Jun 2008 Location: 1.14 acres of heaven Posts: 1,512	Thank you! Now imagine them with a little sour cteam, guac, and chopped green onions on top.

03-07-2019, 06:25 PM	#789
Glinda Fucktard Resistance League Join Date: Jun 2008 Location: 1.14 acres of heaven Posts: 1,512	Yes. I am evil.

03-09-2019, 12:20 PM	#791
Glinda Fucktard Resistance League Join Date: Jun 2008 Location: 1.14 acres of heaven Posts: 1,512	Today, I think I'll make grilled kielbasa with fried potatoes and sauerkraut. MMmmm. Comfort food! Pics later, if I remember. Right now, I need to go let some goats out of their pen. No rest for the wicked!

03-09-2019, 12:33 PM	#792
Clodfobble UNDER CONDITIONAL MITIGATION Join Date: Mar 2004 Location: Austin, TX Posts: 20,012	No good place to put this, so I'mma just leave it here. Mr. Clod bought a new table saw. Big ol' fucker, I don't even know how many hundreds of pounds. Instructions said "it ships on its side for safety, here's how to properly maneuver it into a vertical position once the freight guy unloads it from the truck--you know, with his ramps and his dolly and all that professional jazz." Except it wasn't delivered, it was put into the back of Mr. Clod's truck at the woodshop. So he got home, then asked himself, "Hmm, how am I going to transfer this down 4 feet to the ground? Because I do not have ramps or a commercial dolly, etc." Neighbor swung by, said he'd help, but the thing turned out to be far heavier than either anticipated, and they barely got it moved laterally over to the top of the work bench before becoming dangerously tired. They set it down to rest, and the neighbor said, "Cool, that was fun, gotta go." Next thing I know, he texts me from the garage for help. I come out to find the damn thing suspended with ratchet straps from the fucking ceiling, the corners barely holding on. Long story short, it got lowered down to the ground and is fine now. But goddamn. I can't believe I'm still not a widow by now. __________________ My book My other book My spirit animal

03-09-2019, 01:03 PM	#793
Gravdigr The Un-Tuckian Join Date: Apr 2007 Location: South Central...KY that is Posts: 39,517	Bullshit. Y'all got a sex swing dintchya? __________________ These statements have not been evaluated by the FDA, EPA, FBI, DEA, CDC, or FDIC. These statements are not intended to diagnose, cause, treat, cure, or prevent any disease. If you feel you have been harmed/offended by, or, disagree with any of the above statements or images, please feel free to fuck right off.

03-09-2019, 03:06 PM	#794
glatt ™ Join Date: Jul 2003 Location: Arlington, VA Posts: 27,717	ratcheting straps are great for tightening things slowly and incrementally, but loosening them, they let go all at once. How did he get it down?

03-09-2019, 03:08 PM	#795
Glinda Fucktard Resistance League Join Date: Jun 2008 Location: 1.14 acres of heaven Posts: 1,512	Lunch: Chicken salad sammy with crushed walnuts Cucumber slices Jalepeno Kettle chips Mandarin orange wedges Oh, and Jack Daniels and Diet Coke.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode