What's mildly irritating you today? - Page 209

Shawnee123 · 01-04-2011, 02:35 PM

I don't remember you ever being called a cuntburger around these parts, but I felt it captured the essence of the topic. Actually I stole it from the bathroom wall at a rest stop on I-75N. It read "monster is a cuntburger." *shrugs* I didn't write it. I was too busy writing "for an adequate time call Shaw."

monster · 01-04-2011, 02:58 PM

aaah, well that explains it. I quite like cuntburger as a concept as long as the beef curtains are not too chunky and there's no cheese or mushrooms. Of course, everything is better with bacon. But don't be slipping me any pickle.....

footfootfoot · 01-04-2011, 03:23 PM

Cuntburgler.

Clodfobble · 01-04-2011, 04:56 PM

Quote:

Originally Posted by monster

I quite like cuntburger as a concept as long as the beef curtains are not too chunky and there's no cheese or mushrooms. Of course, everything is better with bacon. But don't be slipping me any pickle.....

It's the mayo that makes me gag...

kerosene · 01-04-2011, 05:12 PM

Quote:

Originally Posted by HungLikeJesus

Just use the Steve Dallas Random Thread Picker and see where that takes you.

Alright, then, I am headed there now.

HungLikeJesus · 01-04-2011, 07:39 PM

We may never see her again.

kerosene · 01-04-2011, 08:13 PM

Actually, the thread I pulled up was the one about Clod having minifob. It was fascinating and then I forgot I was bored. Thanks for the suggestion. You may, consequently, see old threads getting bumped, now, from time to time.

HungLikeJesus · 01-04-2011, 09:33 PM

Now you see why that's below my signature line. You could spend a lot of time on Cellar re-runs.

glatt · 01-05-2011, 09:42 AM

Kitchen faucet lost a lot of pressure the other day. A day of ignoring it didn't produce any results, so I shut the water off under the cabinet and took the faucet apart. It's one of those faucets with the integral spray hose that switches between a stream and spray.

I had to take the whole thing apart to find a screen I could clean, but it still didn't fix it, so I used a wire as a catheter to run down the now disconnected hose. It pushed out a rust flake the size of a lentil. It had been really jammed in there. Awesome! So I put it all back together and it works like a charm.

Only problem is that the shutoff valve under the sink now has a tiny leak at the valve stem. Does anyone make a fixture shutoff valve that won't leak after you use it? Now I need to shut the water off to the whole house and replace this damn valve. It's screwed on to a 60 year old galvanized pipe sticking up out of the floor. How much you want to bet that will get messed up when I try to put a new valve on there?

Grumble grumble grumble...

Lamplighter · 01-05-2011, 09:48 AM

Glatt, if it's just a tiny leak, they usually fix themselves (particularly if you have some rust in those pipes)
So I'd give it a couple of days before tearing it apart further.
Just check daily with Kleenex or toilet paper to see if it still leaking

Laziness often wins the day...
but I'd even try changing out the washer in the valve before working on replacement.

glatt · 01-05-2011, 09:59 AM

I'm trying that. I did the fix last night, and the valve was still leaking this morning. Tiny leak, but one that I can't live with. I'll give it a couple more days. I wonder if rubbing plumber's grease on it from the outside would do anything?

On my list of "things to do" is to re-plumb the entire house with PEX so I stop getting flakes of rust from these old galvanized pipes messing up fixtures.

plthijinx · 01-05-2011, 11:01 AM

Quote:

Originally Posted by glatt

... I wonder if rubbing plumber's grease on it from the outside would do anything?

On my list of "things to do" is to re-plumb the entire house with PEX so I stop getting flakes of rust from these old galvanized pipes messing up fixtures.

it might. if you want to put the project off until the weekend you could turn the water off wipe it dry and seal it with saran wrap and duct tape. that might work.

plthijinx · 01-05-2011, 11:03 AM

Quote:

Originally Posted by Shawnee123

..... I was too busy writing "for an adequate time call Shaw."

what was that number again?

footfootfoot · 01-05-2011, 11:51 AM

Quote:

Originally Posted by glatt

I'm trying that. I did the fix last night, and the valve was still leaking this morning. Tiny leak, but one that I can't live with. I'll give it a couple more days. I wonder if rubbing plumber's grease on it from the outside would do anything?

On my list of "things to do" is to re-plumb the entire house with PEX so I stop getting flakes of rust from these old galvanized pipes messing up fixtures.

Glatt, is it a gate valve or a ball valve? If it is a gate valve and is leaking from the stem you just take off the handle, loosen the large packing nut that goes around the stem and put a piece of stem packing around the stem and then put the packing nut back on, then the handle.

That's why most people use ball valves nowadays.

footfootfoot · 01-05-2011, 11:53 AM

read all about it:
http://www.free-ed.net/sweethaven/bl...p?iNum=fra0502

01-04-2011, 02:35 PM	#3121
Shawnee123 Why, you're a regular Alfred E Einstein, ain't ya? Join Date: Jun 2006 Posts: 21,206	I don't remember you ever being called a cuntburger around these parts, but I felt it captured the essence of the topic. Actually I stole it from the bathroom wall at a rest stop on I-75N. It read "monster is a cuntburger." shrugs I didn't write it. I was too busy writing "for an adequate time call Shaw." __________________ A word to the wise ain't necessary - it's the stupid ones who need the advice. --Bill Cosby

01-04-2011, 02:58 PM	#3122
monster I hear them call the tide Join Date: Dec 2005 Location: Perpetual Chaos Posts: 30,852	aaah, well that explains it. I quite like cuntburger as a concept as long as the beef curtains are not too chunky and there's no cheese or mushrooms. Of course, everything is better with bacon. But don't be slipping me any pickle..... __________________ The most difficult thing is the decision to act, the rest is merely tenacity Amelia Earhart

01-04-2011, 03:23 PM	#3123
footfootfoot To shreds, you say? Join Date: Aug 2004 Location: in the house and on the street-how many, many feet we meet! Posts: 18,449	Cuntburgler. __________________ The internet is a hateful stew of vomit you can never take completely seriously. - Her Fobs

01-04-2011, 07:39 PM	#3126
HungLikeJesus Only looks like a disaster tourist Join Date: Feb 2007 Location: above 7,000 feet Posts: 7,208	We may never see her again. __________________ Keep Your Bodies Off My Lawn SteveDallas's Random Thread Picker.

01-04-2011, 09:33 PM	#3128
HungLikeJesus Only looks like a disaster tourist Join Date: Feb 2007 Location: above 7,000 feet Posts: 7,208	Now you see why that's below my signature line. You could spend a lot of time on Cellar re-runs. __________________ Keep Your Bodies Off My Lawn SteveDallas's Random Thread Picker.

01-04-2011, 08:13 PM	#3127
kerosene Touring the facilities Join Date: Nov 2002 Location: The plains of Colorado Posts: 3,476	Actually, the thread I pulled up was the one about Clod having minifob. It was fascinating and then I forgot I was bored. Thanks for the suggestion. You may, consequently, see old threads getting bumped, now, from time to time.

01-05-2011, 09:42 AM	#3129
glatt ™ Join Date: Jul 2003 Location: Arlington, VA Posts: 27,717	Kitchen faucet lost a lot of pressure the other day. A day of ignoring it didn't produce any results, so I shut the water off under the cabinet and took the faucet apart. It's one of those faucets with the integral spray hose that switches between a stream and spray. I had to take the whole thing apart to find a screen I could clean, but it still didn't fix it, so I used a wire as a catheter to run down the now disconnected hose. It pushed out a rust flake the size of a lentil. It had been really jammed in there. Awesome! So I put it all back together and it works like a charm. Only problem is that the shutoff valve under the sink now has a tiny leak at the valve stem. Does anyone make a fixture shutoff valve that won't leak after you use it? Now I need to shut the water off to the whole house and replace this damn valve. It's screwed on to a 60 year old galvanized pipe sticking up out of the floor. How much you want to bet that will get messed up when I try to put a new valve on there? Grumble grumble grumble...

01-05-2011, 09:48 AM	#3130
Lamplighter Person who doesn't update the user title Join Date: Jun 2010 Location: Bottom lands of the Missoula floods Posts: 6,402	Glatt, if it's just a tiny leak, they usually fix themselves (particularly if you have some rust in those pipes) So I'd give it a couple of days before tearing it apart further. Just check daily with Kleenex or toilet paper to see if it still leaking Laziness often wins the day... but I'd even try changing out the washer in the valve before working on replacement.

01-05-2011, 09:59 AM	#3131
glatt ™ Join Date: Jul 2003 Location: Arlington, VA Posts: 27,717	I'm trying that. I did the fix last night, and the valve was still leaking this morning. Tiny leak, but one that I can't live with. I'll give it a couple more days. I wonder if rubbing plumber's grease on it from the outside would do anything? On my list of "things to do" is to re-plumb the entire house with PEX so I stop getting flakes of rust from these old galvanized pipes messing up fixtures.

01-05-2011, 11:53 AM	#3135
footfootfoot To shreds, you say? Join Date: Aug 2004 Location: in the house and on the street-how many, many feet we meet! Posts: 18,449	read all about it: http://www.free-ed.net/sweethaven/bl...p?iNum=fra0502 __________________ The internet is a hateful stew of vomit you can never take completely seriously. - Her Fobs

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)