Jan 12th, 2019: Guitar Body Build

[xoxoxoBruce]

He spent $500 to build a guitar body out of colored pencils, he already had the neck and hardware.
It would be a lot of work but you could make cool patterns, pictures, or words out of specific lead colors.

People make a lot of cool stuff from colored pencils. And when Burls Art saw them, he decided to take it up an octave.
“I saw a lot of people online making bowls out of colored pencils and I thought that was really cool but I wanted to make something that I can actually utilize and enjoy more so than a bowl when it’s finished,” Burls Art told Bored Panda. “Since I play guitar, I thought this would be a cool project that would accomplish that goal. I decided on making a (Fender) Stratocaster styled electric guitar… This was the first guitar I’ve ever built”

“That’s 1200 colored pencils. Bought the cheapest ones I could find on Amazon. They ended up being nearly identical to Crayola.”
“Cheap harbor freight mini miter saw cutting the pencils into 2″ pieces”
“Cutting the pencils was by far the most tedious portion of the build”

I think he cut them in thirds, and he took the pictures with Crayolas but definitely used knockoffs.

“In goes the epoxy resin”
“Tracing the template onto the slab”
“The epoxy resin / pencils combination was far too dense for me to cut with a jig saw alone, even using a diamond blade. Because of this, I had to drill out the pencil cores to make life a little bit easier on the jig saw”

“The entire block was sanded with 80 grit on the belt sander. Then the left side was progressively sanded up to 360 grit. So the higher grit I went, the more color smear would occur. Smearing was minimal until I went above about 220 grit. This left me with 2 choices.. either have a smooth surface and a grayish/smeared color tone… or… have good clean wood and led colors but at the cost of only being able to sand to 220. The choice was pretty obvious to me being that the colored pencils were the star of the build… I wanted to showcase their colors as much as possible”

Burls Art couldn’t put an accurate number on the time it took him to complete his project. “I worked on it for 4-5 weeks for a few hours a day, like 2-4 hours probably. It took a long time, but for the most part, it was enjoyable. I think I could make one faster now though since I know the processes and things that I would do differently. I’d say I spent in the neighborhood of $500 on it, but some of that includes router bits and other pieces of equipment that I didn’t already have. I already had the guitar neck and hardware though so that saved some money.”

I wonder how heavy that is? You know actually what is epoxied together is the paint on the pencils so I hope it stays on the wood.

This is the video of the build.

link