The Cellar  

Go Back   The Cellar > Main > Creative Expression

Creative Expression Post your own works and chat about them

Reply
 
Thread Tools Display Modes
Old 10-18-2016, 07:27 PM   #301
footfootfoot
To shreds, you say?
 
Join Date: Aug 2004
Location: in the house and on the street-how many, many feet we meet!
Posts: 18,449
can you just saw the existing peg flush then drill a new hole, say 5/32" and use a 16d common nail with the head cut off as a pin?
__________________
The internet is a hateful stew of vomit you can never take completely seriously. - Her Fobs
footfootfoot is offline   Reply With Quote
Old 10-18-2016, 07:33 PM   #302
glatt
 
Join Date: Jul 2003
Location: Arlington, VA
Posts: 27,717
In theory, yes. In practice, I put a pretty big taper on that peg so it would find its hole even when it is off by an eighth or so. I'll have four pegs that have to find their holes simultaneously. So built in slop is good here.
glatt is offline   Reply With Quote
Old 10-18-2016, 07:51 PM   #303
glatt
 
Join Date: Jul 2003
Location: Arlington, VA
Posts: 27,717
I knocked out a new back for the cover. Can't make the peg holder things though because I am out of dowels.
glatt is offline   Reply With Quote
Old 10-18-2016, 08:05 PM   #304
xoxoxoBruce
The future is unwritten
 
Join Date: Oct 2002
Posts: 71,105
Looks like it was made by a wino.
__________________
The descent of man ~ Nixon, Friedman, Reagan, Trump.
xoxoxoBruce is offline   Reply With Quote
Old 10-19-2016, 06:01 AM   #305
Griff
still says videotape
 
Join Date: Feb 2001
Posts: 26,813
...with a bandsaw
__________________
If you would only recognize that life is hard, things would be so much easier for you.
- Louis D. Brandeis
Griff is offline   Reply With Quote
Old 10-19-2016, 01:46 PM   #306
Gravdigr
The Un-Tuckian
 
Join Date: Apr 2007
Location: South Central...KY that is
Posts: 39,517
Quote:
Originally Posted by glatt View Post
Can't make the peg holder things though because I am out of dowels.
Wood pencils?

Nevermind, prolly too fragile.
__________________


These statements have not been evaluated by the FDA, EPA, FBI, DEA, CDC, or FDIC. These statements are not intended to diagnose, cause, treat, cure, or prevent any disease. If you feel you have been harmed/offended by, or, disagree with any of the above statements or images, please feel free to fuck right off.
Gravdigr is offline   Reply With Quote
Old 10-19-2016, 01:47 PM   #307
xoxoxoBruce
The future is unwritten
 
Join Date: Oct 2002
Posts: 71,105
Wood peckers.
__________________
The descent of man ~ Nixon, Friedman, Reagan, Trump.
xoxoxoBruce is offline   Reply With Quote
Old 10-19-2016, 05:54 PM   #308
footfootfoot
To shreds, you say?
 
Join Date: Aug 2004
Location: in the house and on the street-how many, many feet we meet!
Posts: 18,449
Wine bottle corks
__________________
The internet is a hateful stew of vomit you can never take completely seriously. - Her Fobs
footfootfoot is offline   Reply With Quote
Old 10-19-2016, 08:19 PM   #309
lumberjim
I can hear my ears
 
Join Date: Oct 2003
Posts: 25,571
.
__________________
This body holding me reminds me of my own mortality
Embrace this moment, remember
We are eternal, all this pain is an illusion ~MJKeenan

Last edited by lumberjim; 10-19-2016 at 08:20 PM. Reason: Grumpiness retracted
lumberjim is offline   Reply With Quote
Old 10-20-2016, 06:05 AM   #310
Griff
still says videotape
 
Join Date: Feb 2001
Posts: 26,813
split and whittle
__________________
If you would only recognize that life is hard, things would be so much easier for you.
- Louis D. Brandeis
Griff is offline   Reply With Quote
Old 10-20-2016, 12:18 PM   #311
footfootfoot
To shreds, you say?
 
Join Date: Aug 2004
Location: in the house and on the street-how many, many feet we meet!
Posts: 18,449
He needs a lathe...
__________________
The internet is a hateful stew of vomit you can never take completely seriously. - Her Fobs
footfootfoot is offline   Reply With Quote
Old 10-22-2016, 04:12 PM   #312
glatt
 
Join Date: Jul 2003
Location: Arlington, VA
Posts: 27,717
Tinkered with the band saw for several hours today, but nothing to show for it.

The table is made of particle board, and I had cut through the plastic laminate top and bottom to make it the right size. This left an exposed particle board edge. That stuff can suck up moisture and start crumbling like nobody's business. So I found an old partial can of oil based varnish and sealed the cut edges of the particle board.

I made new tabs to go on the top cover, but didn't install them yet. It was a rare moment of clarity. The saw has a bit of a vibration to it, so I wanted to figure out what was vibrating and fix it before locking in on a cover size. You can see the motor shaking a bit too as the frame shakes.

I read in that Bandsaw book Foot recommended that you should align the wheels so they are co-planer and not rely on the crowned wheels so much to align the saw blade. So I got out my straight edge to fine tune that. I figured I might need to shim the wheels with some washers to get them perfectly lined up. When I lined the straight edge up with the bottom wheel, the top wheel was a full 9mm out of alignment further back. WTF? I have no idea how that happened. Did I measure the shaft wrong? Is it a metric thing with the layers of the frame? I don't know, but I do know that I need to fix it before I finish the cover. It's going to mess with the cover a lot to move that top wheel 9 mm forward.

I took the blade off the saw and ran just the powered bottom wheel. The vibrations were still there. I took the bottom wheel off and ran just the motor. No vibrations. So I got out my dial indicator and measured the pulley on the powered wheel. As I slowly rotate it, the needle goes 5 thousandths in one direction and then 15 thousandths in the other. The pulley is 20 thousands out of round. I wonder if that's enough to cause those vibrations? I bet it is. So I'm attempting to turn the pulley again to get it nice and round. I think when I turned it before, my chisel was just riding up the hump and then down into the hollow. I hold it fast to the tool rest more this time as I turn the bottom of the pulley.

So the saw is basically completely disassembled right now as I try to tweak this stuff.
glatt is offline   Reply With Quote
Old 10-22-2016, 06:13 PM   #313
footfootfoot
To shreds, you say?
 
Join Date: Aug 2004
Location: in the house and on the street-how many, many feet we meet!
Posts: 18,449
Quote:
Originally Posted by glatt View Post
Tinkered with the band saw for several hours today, but nothing to show for it.

The table is made of particle board, and I had cut through the plastic laminate top and bottom to make it the right size. This left an exposed particle board edge. That stuff can suck up moisture and start crumbling like nobody's business. So I found an old partial can of oil based varnish and sealed the cut edges of the particle board.

I made new tabs to go on the top cover, but didn't install them yet. It was a rare moment of clarity. The saw has a bit of a vibration to it, so I wanted to figure out what was vibrating and fix it before locking in on a cover size. You can see the motor shaking a bit too as the frame shakes.

I read in that Bandsaw book Foot recommended that you should align the wheels so they are co-planer and not rely on the crowned wheels so much to align the saw blade. So I got out my straight edge to fine tune that. I figured I might need to shim the wheels with some washers to get them perfectly lined up. When I lined the straight edge up with the bottom wheel, the top wheel was a full 9mm out of alignment further back. WTF? I have no idea how that happened. Did I measure the shaft wrong? Is it a metric thing with the layers of the frame? I don't know, but I do know that I need to fix it before I finish the cover. It's going to mess with the cover a lot to move that top wheel 9 mm forward.

I took the blade off the saw and ran just the powered bottom wheel. The vibrations were still there. I took the bottom wheel off and ran just the motor. No vibrations. So I got out my dial indicator and measured the pulley on the powered wheel. As I slowly rotate it, the needle goes 5 thousandths in one direction and then 15 thousandths in the other. The pulley is 20 thousands out of round. I wonder if that's enough to cause those vibrations? I bet it is. So I'm attempting to turn the pulley again to get it nice and round. I think when I turned it before, my chisel was just riding up the hump and then down into the hollow. I hold it fast to the tool rest more this time as I turn the bottom of the pulley.

So the saw is basically completely disassembled right now as I try to tweak this stuff.
Even in the best of situations, it's an iterative process. It's worth the effort IMO. You inspired me to tackle my store-bought saw and for the first time in 10 years the thing cuts like it is supposed to. Duginske's book is great.
__________________
The internet is a hateful stew of vomit you can never take completely seriously. - Her Fobs
footfootfoot is offline   Reply With Quote
Old 10-22-2016, 07:31 PM   #314
glatt
 
Join Date: Jul 2003
Location: Arlington, VA
Posts: 27,717
I figured out my misalignment problem. This vertical peice was built exactly according to the plans in metric. But apparently it was supposed to be as wide as those two 3/4 inch boards underneath it. I guess metric lumber is thinner than the US lumber I used.


So I just need to cut a 9mm thick shim to go in there. And things should line up.

Although maybe that will mess up the blade guide fit. I need to ponder this.
glatt is offline   Reply With Quote
Old 10-22-2016, 10:47 PM   #315
footfootfoot
To shreds, you say?
 
Join Date: Aug 2004
Location: in the house and on the street-how many, many feet we meet!
Posts: 18,449
It happens to the best of us, at least your bandsaw didn't go plowing through the atmosphere, continuing out beyond Mars and now could be orbiting the sun...

This article begs to be re-written, Onion style, with Glatt exchanged for NASA and bandsaw for rocket and Mrs; Glatt as the JPL Admin. Bu I'm too tired right now.

http://edition.cnn.com/TECH/space/99...ars.metric.02/

Quote:
CNN) -- NASA lost a $125 million Mars orbiter because a Lockheed Martin engineering team used English units of measurement while the agency's team used the more conventional metric system for a key spacecraft operation, according to a review finding released Thursday.

The units mismatch prevented navigation information from transferring between the Mars Climate Orbiter spacecraft team in at Lockheed Martin in Denver and the flight team at NASA's Jet Propulsion Laboratory in Pasadena, California.

Lockheed Martin helped build, develop and operate the spacecraft for NASA. Its engineers provided navigation commands for Climate Orbiter's thrusters in English units although NASA has been using the metric system predominantly since at least 1990.

No one is pointing fingers at Lockheed Martin, said Tom Gavin, the JPL administrator to whom all project managers report.

"This is an end-to-end process problem," he said. "A single error like this should not have caused the loss of Climate Orbiter. Something went wrong in our system processes in checks and balances that we have that should have caught this and fixed it."

The finding came from an internal review panel at JPL that reported the cause to Gavin on Wednesday. The group included about 10 navigation specialists, many of whom recently retired from JPL.

"They have been looking at this since Friday morning following the loss," Gavin said.

The navigation mishap killed the mission on a day when engineers had expected to celebrate the craft's entry into Mars' orbit.

After a 286-day journey, the probe fired its engine on September 23 to push itself into orbit.

The engine fired but the spacecraft came within 60 km (36 miles) of the planet -- about 100 km closer than planned and about 25 km (15 miles) beneath the level at which the it could function properly, mission members said.

The latest findings show that the spacecraft's propulsion system overheated and was disabled as Climate Orbiter dipped deeply into the atmosphere, JPL spokesman Frank O'Donnell said.

That probably stopped the engine from completing its burn, so Climate Orbiter likely plowed through the atmosphere, continued out beyond Mars and now could be orbiting the sun, he said.

Climate Orbiter was to relay data from an upcoming partner mission called Mars Polar Lander, scheduled to set down on Mars in December. Now mission planners are working out how to relay its data via its own radio and another orbiter now circling the red planet.

Climate Orbiter and Polar Lander were designed to help scientists understand Mars' water history and the potential for life in the planet's past. There is strong evidence that Mars was once awash with water, but scientists have no clear answers to where the water went and what drove it away.

NASA has convened two panels to look into what led to the loss of the orbiter, including the internal peer review panel that released the Thursday finding. NASA also plans to form a third board -- an independent review panel -- to look into the accident.


Metric system used by NASA for many years

A NASA document came out several years ago, when the Cassini mission to Saturn was under development, establishing the metric system for all units of measurement, Gavin said.

The metric system is used for the Polar Lander mission, as well as upcoming missions to Mars, he said.

That review panel's findings now are being studied by a second group -- a special review board headed up by John Casani, which will search for the processes that failed to find the metric to English mismatch. Casani retired from JPL two months ago from the position of chief engineer for the Lab.

"We're going to look at how was the data transferred," Gavin said. "How did it originally get into system in English units? How was it transferred? When we were doing navigation and Doppler (distance and speed) checks, how come we didn't find it?"

"People make errors," Gavin said. "The problem here was not the error. It was the failure of us to look at it end-to-end and find it. It's unfair to rely on any one person."
__________________
The internet is a hateful stew of vomit you can never take completely seriously. - Her Fobs
footfootfoot is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:30 AM.


Powered by: vBulletin Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.