The Cellar

The Cellar (http://cellar.org/index.php)
-   Nothingland (http://cellar.org/forumdisplay.php?f=36)
-   -   There's lumberthing I want to tell you (http://cellar.org/showthread.php?t=29093)

lumberjim 10-18-2019 11:33 AM

Yuuuge

https://uploads.tapatalk-cdn.com/201...7446130260.jpg

Gravdigr 10-18-2019 11:43 AM

Instead of a cockscomb, it's a cockscombover!

sexobon 10-18-2019 05:25 PM

A cock with a dickhead.

That used to be a normal finding.

monster 10-18-2019 06:12 PM

*snort*

lumberjim 10-23-2019 09:11 PM

Still not ready to give you a proper tour.... But! I did fix the doorbell!



glatt 10-24-2019 07:04 AM

I like it. Well done.

lumberjim 10-24-2019 09:27 AM

they get $100 and up for new/antique ones like that. Ours was inoperative and tarnished, but I took it apart, replaced a washer where someone had used a twist tie trying to fix it, re-seated a gear that was stripped, and lubricated it.

I used the same stuff I cleaned up the chrome on the harley with to polish that bell. Shiny!

Then took the paint off the outside collar and knob with a wire brush attachment on the drill. No polish outside, I like it better looking a bit weathered.

Clodfobble 10-24-2019 09:28 AM

Nice!

fargon 10-24-2019 02:06 PM

Pretty and it works. Can we hear it on the inside please?

lumberjim 10-24-2019 02:11 PM

If you watch to the end you hear it

Griff 10-24-2019 05:54 PM

Excellent!

Gravdigr 10-24-2019 06:27 PM

One ringy-dingy...

Two ringy-dingy...[/Ernestine]

lumberjim 11-02-2019 10:18 AM

I told myself a joke in a dream last night.

We hired a new lady named Helen Waite. I introduced myself and asked if she was going to be the complaints manager. She didn't get it, so I said, when people have a complaint, they go to Helen Waite. Still didn't get it. Hell... And... Wait.

She shoved me.

lumberjim 11-13-2019 07:24 PM

Been working on concealing the supply and drain pipes from the washing machine relocation.

https://uploads.tapatalk-cdn.com/201...3b130d81ba.jpg

https://uploads.tapatalk-cdn.com/201...e635ee51b9.jpg


Had to allow for the molding. Used this thing :
https://uploads.tapatalk-cdn.com/201...7d1ad54e47.jpg

https://uploads.tapatalk-cdn.com/201...b602d7da5d.jpg
Now I'm pondering putting shelves into the columns. Either the inside or face.....
Or maybe just trim it out with molding and make the shelves inside the boxed in columns afterwards. I'm going to mount a row of coat hooks on the wall and put a bench between the low boxes with shoe cubbies or drawers or under it. There will be a sophet across the top, and shelves hung from that. The ceiling is 9'. The sophet will be 12", so maybe 18" below the bottom will look good and be useful. https://uploads.tapatalk-cdn.com/201...3840b45183.jpg

zippyt 11-13-2019 10:25 PM

i like that , guuud jobz !!


All times are GMT -5. The time now is 03:45 PM.

Powered by: vBulletin Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.