Building a bandsaw on the cheap from mostly scrap wood

[glatt]

It's been almost a month since I did anything with this project. The big problem is that my shop was a mess. Literally not a single empty flat surface to work on in the entire shop. My son loves to work in the shop, but he just doesn't clean up after himself. The big problem is that he doesn't have any designated space that is his, so his stuff doesn't have a home and just sits around.

So I spent about 45 minutes on Sunday July 24th, just cleaning up the shop and putting stuff away. I eventually got both the table saw and work bench cleared off.

Then I spent another 45 minutes actually working on the saw. I'm focusing on the blade guides now. I cut the notch on the blade guide arm. The upper blade guide will mount in that notch.

And then I started cutting up the parts for the blade guides. I'll still need to drill holes in them and mount bearings, but this is the basic configuration they will have.

That dark colored wood in the front is bocote, an exotic tropical hardwood. The plans call for it by name, and I actually had some because my brother gave me a box of exotic wood samples years ago. It sat unused until now because the samples are so small, they are fairly useless.
Anyway, bocote is called for because it has a high oil content or something and is very slippery. Great for coming into contact with the running blade to keep it on track.