Bikes!

xoxoxoBruce · 03-22-2013, 05:18 PM

Even with a sharp cutter, you end up with a bundle of wires cut off square. Not conducive to threading through a maze, as the blunt end of the wires on the outside of the bundle are going to catch. The wires have to be secured together, preferably in a way that can form a point, or at least rounded edges. Since you don't have the proper stuff to solder them, probably epoxy would be best. After it sets, you may even be able to contour it a little with an abrasive.

and more beer.

03-22-2013, 05:18 PM	#11
xoxoxoBruce The future is unwritten Join Date: Oct 2002 Posts: 71,105	Even with a sharp cutter, you end up with a bundle of wires cut off square. Not conducive to threading through a maze, as the blunt end of the wires on the outside of the bundle are going to catch. The wires have to be secured together, preferably in a way that can form a point, or at least rounded edges. Since you don't have the proper stuff to solder them, probably epoxy would be best. After it sets, you may even be able to contour it a little with an abrasive. and more beer. __________________ The descent of man ~ Nixon, Friedman, Reagan, Trump.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)